The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They prevent the car from starting if it does not have a key fob. They also work well to stop hotwiring and other traditional types of vehicle theft. However, newer methods like key cloning and relay theft are becoming more widespread.
The Ghost Immobiliser has been designed to fight these trends and make your car inaccessible. It is silent and stealthy and does not rely on key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network inside your vehicle to prevent key cloning and theft. It is an TASSA approved product and is approved by insurance companies. It operates quietly and is virtually undetectable to thieves. It makes use of buttons on your steering wheel as well as the central console to create an individual pin-code sequence you must enter before you can start your car. You can create up to 20 different sequences in order to increase security. The system is easy to install and doesn't require any additional hardware.
To ensure the best possible results It is recommended that you use a reputable CAN-immobiliser installer who specializes in your vehicle type. Ideally, they'll have a workshop in your area where you can go to get your installation done. You can also find various tools and materials that will help you with the installation. These include basic hand tools, a multimeter and insulation tape, as well as heat shrink tubing to protect connections. A user's manual will provide you with instructions for your vehicle's wiring.
Before starting the installation remove the battery from the circuit to prevent short circuits and airbag deployment. It is crucial to confirm the location of the CAN H and CAN L wires as the wrong identification could result in improper system integration. It is also a good idea to label or mark the wires. Also, use a multimeter to verify that the identified power source is able to provide a consistent 12V power supply.
Advanced thieves can use different methods to get around the Ghost Immobiliser. These include jamming and using spoofing signals. These methods work by amplifying signals sent from the key fob to your vehicle's electronic controller unit. With the help of advanced anti-jamming technology and a vigilant surveillance you can safeguard your vehicle from these sophisticated attacks.
Security Increased
Ghost immobilisers are an extra layer to protect your car against theft. It uses an PIN code protection system that is activated by pressing buttons on your dashboard or steering wheel, making it difficult for thieves to gain access the device and steal your vehicle. The device is designed to be hidden in your vehicle. It does not have lights, or other signals to alert potential burglars to its presence. It communicates directly with the ECU of your car via the data bus. This means that it is not vulnerable to relay attacks or hacking.
This system is a great investment for those who own prestige vehicles, as they are at greater risk of theft due to their value and their popularity. Its enhanced security features guard against key duplicates, ECU swapping, and other threats to your vehicle's security. Ghost immobilisers can be paired with an app, allowing you can easily arm and disarm them. They may also include a service/valet setting that allows you temporarily deactivate the immobiliser while your vehicle undergoes repairs or maintenance.
ghost immobiliser review of a ghost immobiliser is that it does not require any cutting of wire. This is a great feature, especially if your car is newer and doesn't include an immobiliser. Certain systems can also be integrated with GPS tracking devices, providing an additional layer of security to your car. The use of a GPS tracker may also help you reduce your insurance premiums. If you decide to purchase a ghost immobiliser make sure it is TASSA-certified and that a professional installer installs the device for you.
Compatible with all major models and brands
The Ghost Immobiliser is made to work with all major vehicle models and makes, protecting your prized possessions from theft. It utilizes buttons on your steering wheel, the centre console, or door panels to generate a unique pin code, which you must enter before you can drive your car. The system is tamper-proof and undetectable. It's also comes with a three-year guarantee. It is also fully accredited by insurance providers and insurance companies, which means it could help lower your premiums.
The Ghost system differs from the standard immobilisers that use the key fob for ignition control. It connects directly to the engine controller through the CAN bus. This means it's impervious to tampering, and is virtually impossible to disable or remove and is not targeted by organized car theft criminal gangs. Additionally to this, the Ghost system can be paired with an encrypted iPhone application that permits remote management and monitoring.
You can design a PIN that is simple to remember, but mathematically, it is impossible to guess for thieves. The PIN can be customised and changed at any point and you can keep your car safe even when it's parked on the streets or in a public parking lot. You can also set a service or valet mode if you need someone else to drive your vehicle for a short period such as when you're in the garage for servicing. This feature is also a great way to prevent your vehicle from being stolen by a scammer mechanic. You can select a Ghost Call alert to give you additional peace of mind. It will inform you when your car is moving or has been moved.
Convenience
The ghost immobiliser shields your vehicle from theft techniques like key replication or relay attacks. It is activated by connecting to the car's CAN network and blocking communication with the engine ECU. This makes it very difficult for criminals to hack or copy your vehicle.
After installation, you'll need to enter a PIN of up to 20 digits in length using the buttons on the dashboard as well as the steering wheel to begin the car. The system is completely concealed, and therefore undetectable by thieves. It doesn't emit radio frequency signals. It can be configured with a PIN code that is user-changeable, adding to its security. The system is also designed to prevent circuit cutting and makes it virtually impossible to alter.
If you do have a problem remembering your PIN, there are some systems that allow you to communicate with the immobiliser using an app on your smartphone to disarm it immediately. Some even have a service/valet mode that allows you to start your car temporarily, such as when you have to drop it off for maintenance or valet parking.
The Ghost Immobiliser is also indetectable to thieves because it doesn't transmit radio signals, which is a significant advantage over other aftermarket car security systems. It is also easy to use and doesn't require any complex wiring. You can also use it in conjunction with a dash cam for additional security. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The system can be hardwired to ensure the highest performance and durability.
Installation
If you want to protect your vehicle from theft It is essential to choose the right immobiliser ghost . This device will help to prevent car theft by blocking the communication between the engine controller unit (ECU) and key fobs. This device blocks thieves from stealing the signal used to start your vehicle. It can also detect the moment it has been altered with and notify the owner of the vehicle.
The device is simple to install and works with the existing systems in your vehicle. It doesn't require any modification to the vehicle wiring and can be installed in a concealed location like under the dashboard. To make sure that the device is correctly installed, follow the instructions in the user's manual. After installation, it's crucial to test the system. This will ensure the ghost of the immobiliser works as it should.
You can buy an Autowatch Ghost 2 immobiliser and have it installed by a reputable installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to remove or disable the system. The installation process generally takes about 2 hours.
When installing the Ghost it is recommended that you review the wiring diagram of the vehicle model you are using. This will help you identify the CAN High and CAN Low wires that are required to connect the Ghost to the engine of your vehicle. It is also important to double-check the connections to make sure that they are secure and insulated.
Once the installation is completed, you can begin using the Ghost Immobiliser as normal. It will turn off the ignition of your vehicle if it is not able to start it using the correct PIN, which is something you can enter yourself. The immobiliser ghost can be set to Service/Valet Mode in case you need your vehicle serviced or valet parked.